Introduction to the Junos Operating System

This three-day course provides students with the foundational knowledge required to work with the Junos operating system and to configure Junos devices. The course provides a brief overview of the Junos device families and discusses the key architectural components of the software. Key topics include user interface options with a heavy focus on the command-line interface (CLI), configuration tasks typically associated with the initial setup of devices, interface configuration basics with configuration examples, secondary system configuration, and the basics of operational monitoring and maintenance of Junos devices. The course then delves into foundational routing knowledge and configuration examples including general routing concepts, routing policy, and firewall filters. Through demonstrations and hands-on labs, students will gain experience in configuring and monitoring the Junos OS and monitoring basic device operations. This course is based on Junos OS Release 19.2R1.8.

Objetivos

After you complete this course you will be able to:

Describe the basic design architecture of the Junos OS.
Navigate within the Junos CLI.
Perform tasks within the CLI operational and configuration modes.
Restore a Junos device to its factory-default state.
Perform initial configuration tasks.
Configure and monitor network interfaces.
Describe user configuration and authentication options.
Perform secondary configuration tasks for features and services such as system logging (syslog) and tracing, Network Time Protocol (NTP), configuration archival, and SNMP.
Monitor basic operation for the Junos OS and devices.
Identify and use network utilities.
Upgrade the Junos OS.
Perform file system maintenance and password recovery on a Junos device.
Navigate within the Junos J-Web interface.
Explain basic routing operations and concepts.
View and describe routing and forwarding tables.
Configure and monitor static routing.
Configure and monitor OSPF.
Describe the framework for routing policy and firewall filters.
Explain the evaluation of routing policy and firewall filters.
Identify instances where you might use routing policy.
Write and apply a routing policy.
Identify instances where you might use firewall filters.
Write and apply a firewall filter.
Describe the operation and configuration for unicast reverse path forwarding (RPF).
Follow recommended procedure to open a JTAC support case.
Access support resources.
Use the customer support Website.
Access and use customer support tools
Use FTP to transfer large files to JTAC.
Identify high-level security challenges in today’s networks.
Explain the value of implementing security solutions.
Identify key factors in Juniper Networks’ security focus.
Describe some differences between IPv4 and IPv6.
List IPv6 address types and describe the IPv6 addressing format.
Enable an interface for IPv6 operation.
Configure and monitor routing for IPv6 environments.
Tunnel IPv6 traffic over and IPv4 network.

so

Disponible en formato e-learning

Disponible en formato presencial

Disponible en formato a distancia

Subvención disponible
A través de Fundae, cumpliendo requisitos.

Duración
10 horas

  • Dificultad 50% 50%
  • Nivel alcanzado 80% 80%

Dirigido a

Conocimientos requeridos

Temario

Junos Operating System Fundamentals

The Junos OS
Traffic Processing
Overview of Junos Devices
User Interface Options: The Junos CLI

User Interface Options
The Junos CLI: CLI Basics
The Junos CLI: Operational Mode
The Junos CLI: Configuration Mode
User Interface Options: The J-Web Interface

User Interface Options
The Junos CLI: CLI Basics
The Junos CLI: Operational Mode
The Junos CLI: Configuration Mode
Lab 1: User Interface Options
Initial Configuration

Factory-Default Configuration
Initial Configuration
Interface Configuration
Lab 2: Initial System Configuration
Secondary System Configuration

User Configuration and Authentication
System Logging and Tracing
Network Time Protocol
Archiving Configurations
SNMP
Lab 3: Secondary System Configuration
Operational Monitoring and Maintenance

Monitoring Platform and Interface Operation
Network Utilities
Maintaining the Junos OS
Password Recovery
System Clean-Up
Lab 4: Operational Monitoring and Maintenance
Interface Configuration Examples

Review of the Interface Configuration Hierarchy
Interface Configuration Examples
Using Configuration Groups
Routing Fundamentals

Routing Concepts: Overview of Routing
Routing Concepts: The Routing Table
Routing Concepts: Routing Instances
Static Routing
Dynamic Routing
Lab 5: Routing Fundamentals
Routing Policy

Routing Policy Overview
Case Study: Routing Policy
Lab 6: Routing Policy
Firewall Filters

Firewall Filters Overview
Case Study: Firewall Filters
Unicast Reverse-Path-Forwarding Checks
Lab 7: Firewall Filters
Class of Service

CoS Overview
Traffic Classification
Traffic Queueing
Traffic Scheduling
Case Study: CoS
Lab 8: Class of Service
JTAC Procedures

Opening a Support Case
Customer Support Tools
Transferring Files to JTAC
Juniper Security Concepts

Security Challenges
Juniper Networks’ Security Focus
Apendix A: IPv6 Fundamentals

IPv6 Addressing
Protocols and Services
Configuration

Solicita información del curso

Esta web utiliza cookies propias y de terceros para su correcto funcionamiento y para fines analíticos. Contiene enlaces a sitios web de terceros con políticas de privacidad ajenas que podrás aceptar o no cuando accedas a ellos. Al hacer clic en el botón Aceptar, acepta el uso de estas tecnologías y el procesamiento de tus datos para estos propósitos. Ver Política de cookies
Privacidad